Calibrators MAGNITONIKA ZM3003, H4-7, B2-43, P320, etc.

• Calibrator–meters of normalized signals ZM-3001 are designed to provide verification of technical means of automated process control systems (resistance thermometers, thermocouples, normalizing converters, etc.) during manufacture, operation and during commissioning, as well as to improve the performance of verification work.

• ZM3001. Technical specifications.

• Power calibrators are designed for verification of electrical measuring devices of accuracy class 0.1 and less accurate during production and operation.

• ZM3003. Technical specifications.

• Universal calibrators H4-6 and H4-7 are precision instruments designed for verification, calibration and research of a wide range of instruments and devices, both as part of automated systems (with RS-232C and IEEE 488 instrument interfaces) and independently.

• H4-6. Technical specifications.
• H4-7. Technical specifications.

• Universal calibrators H4-11 are designed for calibration (verification) of electrical measuring devices (switches), including at the place of their installation due to the high mobility of the device and the short time of setting the operating mode. Calibrators H4-11 provide reproduction of voltage up to 600 V and current up to 2 A.

• H4-11. Technical specifications.

• Automated measuring systems of constant voltage K6-10 represent a working standard of units of EMF, voltage and DC power to provide automated verification of working standards of EMF and DC voltage of the 2nd and 3rd digits.

• K6-10. Technical specifications.

• Calibrators-voltmeters V1-28 are designed for verification, calibration of a wide range of devices and devices. They can work independently and as part of automated systems through the standard CPC interface.

• B1-28. Technical specifications.

• Voltmeters-calibrators of constant voltage B2-43 and B2-43/1 carry out high–precision measurement and reproduction of DC voltages in a wide range (1 nV - 1000 V) with high resolution (7 - 8 decimal digits).

• B2-43. Technical specifications.

• Comparators-calibrators P3003M1-1, P3003M1-2 are designed for comparing and measuring DC voltage, as well as for issuing calibrated voltages from 10 nV to 11.11110 V.

• P3003. Technical specifications.

• DC voltage comparators P3017 are designed for relative measurements of DC voltage, its amplification and output of calibrated DC voltage. The measured value is compared with the linear reference voltage of the comparator.

• P3017. Technical specifications.

• Calibrators P320, P321, P327 are a precision source of calibrated voltages and currents with local (manual) and software (remote) control. Designed for use in automated verification installations, as well as as independent devices for checking analog and digital devices on direct current.

• P320. Technical specifications.
• P321. Technical specifications.
• P327. Technical specifications.

• Verification complexes ZM3003. Description of the vehicle type.
• Calibrators-meters of normalized signals ZM3001. Description of the vehicle type.

Price list

Product catalog